High Purity Scandium Metal Sc Metal refers to high-purity scandium metal. Scandium metal is a silver-white metal that typically appears in the form of distilled crystalline blocks (filamentous), as well as castings, sponge blocks, crystals, or even button-shaped castings. Its surface is clean. Its purity can reach 99.9%~99.999%.
Titanium carbonitride (TiCN) is a very important material, because of its excellent hardness and wear resistance, is widely used in cutting tools, molds and wear parts and other fields. Compared with other traditional hard materials, titanium carbonitride has certain advantages in hardness, wear resistance, heat resistance and environmental impact.
Lithium sulfide (Li2S) is a potential battery material with high energy density and low cost, so it has attracted much attention in the battery field. As a new type of battery material, the research and development of lithium sulfide are of great significance to promote the progress of battery technology and meet people's increasing energy demands.
Bismuth oxide (Bi2O3), as a compound with unique properties, is not only widely used in traditional ceramics and electronic manufacturing, but also shows great potential in the emerging fields of photoelectric materials and high temperature superconducting materials.
Molybdenum diboride (MoB2) is a hard material with excellent physical and chemical properties. Due to its unique crystal structure and chemical bonding properties, MoB2 has wide application prospects in many fields. As a new type of engineering material, MoB2 has a high hardness, comparable to diamond and silicon carbide, and has high thermal and electrical conductivity.
Nickel oxide (NiO) is a material with wide application and importance, and its nanostructure has potential application value in many fields. The synthesis method and properties of nickel oxide nanomaterials were studied in this paper. Nanomaterials with different morphologies, such as nickel oxide nanoparticles, nanowires and nanorods, were successfully prepared using different synthesis strategies. In addition, the properties of Ni oxide nanomaterials in catalysis, optoelectronics and sensing were also studied.
Few layer graphene (also known as carbon two-dimensional material) is an innovative new material. It has an atomic thickness and can be used for atomic thickening. You can use it as a lithium-battery anode material. Purity: 99% About Many Layers
Silicon Oxide SiO2 Silencious Nanospheres is a Lithium Battery Anode Material. It features uniform particle size and hollow structure. Purity: 99%Particle size: 300-600 nm About Silicon Oxide SiO2 Hollow nanospheres for Lithium Battery anode Material
Silicon monoxide can be described as an inorganic compound. Its chemical formula is SiO. At room temperature and pressure, it's a dark brownish to loess-colored, amorphous powder.Particle Size 2um About Silicon Monoxide SiO powder for Lithium
The artificial composite graphite mixture 15 is a lithium-ion battery anode. You will find it has high capacities, excellent rate performance and long-lasting pressure.Particle Size: 14um About 99.95% Artificial Composite Graphite Pulp 15 Lithium
Modified graphite powder TRA (modified artificial graphite) is a lithium anode material. It increases the wettability and shrinkage of the pole pieces, which has a positive influence on the battery's overall life.Particle Size: 14um About 99.95%
Modified Artificial Graphicite Powder 16S from needle coke is high-end, artificial graphite.16.3mm particle size Performance of Anode Materials 99.95% Modified Artificial Graphite Pul 16S. Modified graphite powder 16S is characterized by high
Zirconium Hydride ZrH2 Powder refers to high-purity zirconium hydride powder. The chemical formula of zirconium hydride is ZrH2, with a density of 5.6g/cm ³; it is a stable powder that is stable to air and water under normal conditions. It can react violently with oxidants and strong acids, burn smoothly during ignition, decompose at 300 ℃ in a vacuum, and completely decompose at 500-700 ℃. Zirconium hydride has a metallic appearance, black powder, and conductivity between metal and semiconductor.
Sorbitol monoleate, also known as sorbitol anhydride monoleate, can be used as a non-ionic surfactant. About Sorbitan monooleate: Sorbitol monooleate, also known as sorbitol anhydride monooleate, can be used as a non-ionic surfactant.
AEG Alkyl Ethoxy Polyglycosides belongs to the performance-improvement products of alkyl Glycoside APG and Aliphatic Alcohol Ether AEOn. Active matter content >=50 AEG Alkyl-ethoxy polyglycosides : AEG products can be used in formulas
0086-0379-64280201
sales5@nanotrun.com
skype
whatsapp