expected_Material Science news, applications, product infor

The nano-gold solution is a stable and uniform neutral solution that disperses nano-gold particles with a particle size below 12nm into an aqueous solution, also known as colloidal gold, nano-gold colloidal aqueous dispersion solution, or water-soluble nano-gold. The gold nanoparticles in this solution are made of high-purity gold through a special processing process, and their particle size is usually below 15nm, so they have many unique physical and chemical properties, such as good biocompatibility, catalysis, conductivity, and so on.

When Gold is Made At the Nanoscale, It Can Be Used in Many Unexpected Ways!

The nano-gold solution is a stable and uniform neutral solution that disperses nano-gold particles with a particle size below 12nm into an aqueous solution, also known as colloidal gold, nano-gold colloidal aqueous dispersion solution, or water-soluble nano-gold. The gold nanoparticles in this solution are made of high-purity gold through a special processing process, and their particle size is usually below 15nm, so they have many unique physical and chemical properties, such as good biocompatibility, catalysis, conductivity, and so on.

More>>

Related news

Di (palmiticcarboxyethyl) hydroxyethyl methyl ammonium methylsulfate

TEP75, a novel cationic suprafactant from plant-derived cationic surfactants is a replacement for cationic conditioning agent such as polyaquaternium salts or octadecyltrialtrimethyl chloride. About Di (palmiticcarboxyethyl) hydroxyethyl methyl amm

More>>

Application Research of Manganese Silicide

Manganese silicide, as an important inorganic compound, has shown broad application prospects in many fields because of its unique physical and chemical properties. In recent years, with the rapid development of materials science and engineering technology, the application of manganese silicide has been widely concerned.

More>>

The Process Flow And Construction Control Points Of Alkali-resistant Fiberglass Mesh Splicing!

The position of the structural expansion mold is first chiseled, and then rinsed with water. Plastering can be done only after the repair is smooth. It is strictly forbidden to have small or large spots on the edges of doors, windows, etc. in plastering.The thickness of the base layer should be 3mm, and no leakage should be allowed. If there is any leakage, it should be repaired in time.

More>>