POPE p-Tert-octylphenol-ethylene oxide condensate CAS 2315-64-2

Pope-4 and Pope-7 are soluble in oil and other organic solvents, and are dispersed in water. They are used as W/O emulsifiers in general industry. Active matter content: <=1.0 %

About POPE p-Tert-octylphenol-ethylene oxide condensate:
Physical properties:

Depending on their molecular structure and crystalline state, p-tert-octylphenol-ethylene oxide condensates are usually solid or liquid. Its color may vary depending on purity and other factors, usually white or pale yellow. The compound has a specific odor, but the specific odor varies depending on purity and concentration.

The melting point range of the compound depends on its molecular structure and crystalline state. The melting point can range from low to high, depending on the synthesis method and purity.

The boiling point range of the compound also depends on its molecular structure and purity. Depending on the synthesis method and purity, the boiling point can range from a lower to a higher one.

Chemical properties:

P-tert-octylphenol - ethylene oxide condensate has specific chemical properties, including reactivity, stability and oxidation resistance.

The compound is highly reactive and can react with various chemical substances. For example, it can react with alcohols, acids, bases, etc., to form new compounds. Chemical reaction equations can describe these reactions, but the specific reaction conditions and products depend on the type and concentration of reactants.

The compound has high stability and can be stored at room temperature for a long time without deterioration. However, the compound may decompose or oxidize in high temperatures or strong oxidants. Therefore, paying attention to the effects of temperature and oxidation during storage and use is necessary.

In addition, the p-tert-octylphenol-ethylene oxide condensate also has antioxidant properties, which can prevent or delay the oxidation of other substances. This oxidation resistance may be related to the hydroxyl and phenolic hydroxyl groups in their molecular structure, which can provide electrons to give free radicals, thus inhibiting the oxidation reaction.

Technical Parameter of PHES Sodium 2-Propyl-1-heptanol Ether Sulfate:

Applications of  POPE p-Tert-octylphenol-ethylene oxide condensate  :

Cosmetics and skincare products:

P-test-octyl phenol-ethylene oxide condensate has been widely used in cosmetics and skincare products. It is used as an emulsifier, thickener and stabilizer to help improve the stability and texture of the product. Therefore, in skin care products, p-tert-octylphenol - ethylene oxide condensate can be used in lotions, creams, serums and other products.

Plastic and rubber additives:

P-tert-octylphenol - ethylene oxide condensate can be used as an additive to plastics and rubber to improve their properties and stability. It can be used as a plasticizer, antioxidant and stabilizer to improve the processability, heat resistance, weather resistance and aging resistance of plastics and rubber. In the field of plastics, the compound can be used in polyvinyl chloride, polyethylene, polypropylene and other plastic products.

Paints and Coatings:

P-tert-octylphenol - ethylene oxide condensate can be used as a thickener and leveling agent in paints and coatings to improve the coating properties. It can make paints, and coatings have better fluidity and adhesion, improving the coating film's gloss and weather resistance. In the field of paints and coatings, the compound can be used in automotive, architectural, furniture, and other products.

Pesticides and pesticide additives:

P-tert-octylphenol - ethylene oxide condensate can be used as a stabilizer and dispersant in pesticides and pesticide auxiliaries to improve the stability and dispersity of pesticides. It can be mixed with pesticides to make the pesticides better dispersed on the plant's surface and improve the pesticides' permeability and adhesion. In the field of pesticides, the compound can be used in insecticides, fungicides, herbicides and other products.

Production Methods of  POPE p-Tert-octylphenol-ethylene oxide condensate  :

Raw material preparation:

First, preparing p-tert-octylphenol and ethylene oxide as raw materials is necessary. P-tert-octylphenol can be obtained by acidizing sodium p-octylphenol with sulfuric acid. The oxidation of ethylene can prepare ethylene oxide.

Reaction conditions:

The prepared p-tert-octylphenol and ethylene oxide were mixed according to a particular proportion, the catalyst and solvent were added, and the reaction was carried out under a specific temperature and pressure. It is necessary to control the temperature, pressure and reaction time during the reaction process to ensure the smooth progress of the reaction.

Separation and purification:

After the reaction, the products must be separated and purified. Separation and purification are usually carried out by distillation, crystallization or extraction. After separation and purification, the condensation of p-tert-octylphenol and ethylene oxide with high purity can be obtained.

Product quality control:

In the production process, the quality of the product needs to be strictly controlled. At the same time, it is also necessary to conduct quality inspections on the product to ensure its Stability and reliability.

In the actual production process, adjusting and optimizing according to the specific situation is necessary to improve production efficiency and product quality.

Packing & Shipping of POPE p-Tert-octylphenol-ethylene oxide condensate:

We have many different kinds of packing which depend on POPE p-Tert-octylphenol-ethylene oxide condensate quantity.
POPE p-Tert-octylphenol-ethylene oxide condensate packing: 1kg/bag, 25kg/barrel, or 200kg/ barrel.
POPE p-Tert-octylphenol-ethylene oxide condensate shipping: could be shipped out by sea, by air, by express as soon as possible once payment receipt.

Inquiry us